welcome to Canton-Electronics Store
FIFO 2.2-3.8V FSK RF Wireless 868MHZ Transceiver Module Multi Chanel

FIFO 2.2-3.8V FSK RF Wireless 868MHZ Transceiver Module Multi Chanel

  • Model: HY029
  • Shipping Weight: 0.01Kg
  • 10000 Units in Stock

USD $4.99

Quantity:
  • Product Description
  • Shop Confidence
  • Shipping & Return
  • Customer Reviews
Tranceiver Module No.: HYRM12B  868MHZ;
Qty: 1 PCS transceiver module ; 
Product Freq. power supply Data-rate(kbps) Output Power(MAX) Sensitivity Tx Current(MAX) Work Current stand by current
HYRM12B 433,868, 915MHz 2.2-3.8V 115.2 5dBm at 433MHz -105dBm at 433MHz 22mA at 433MHz 11mA at 433MHz ≤0.3µA
3dBm at 868MHz -102dBm at 868MHz 23mA at 868MHz 12A at 868MHz
3dBm at 915MHz -102dBm at 915MHz 24mA at 915MHz 13A at 915MHz

HY029.jpg

HY029 1.jpg


HY029 2.jpg  
   

HY029 3.jpg
 
 
GENERAL
HYRM12B features a completely  integrated PLL for easy RF design, and its rapid settling time allows for fast frequency-hopping, bypassing multipath fading and interference to achieve robust wireless links. The PLL’s high resolution allo ws the usage of multiple channels in any of the bands. The receiver baseband bandwidth (BW) is programmable  to accommodate various deviation, data rate and crystal tolerance requirements. The transceiver employs the Zero-IF approach with I/Q demodulation. Consequently, no external components (except crystal and decoupling) are needed in most applications.   HYRM12B  dramatically  reduces the load on the  microcontroller with the integrated digital data processi ng features: data filtering, clock recovery, data pattern recognition,  integrated FIFO and TX data register. The automatic frequency control (AFC) feature allows the use of a low accuracy (low cost) crystal. To minimize the  system cost,HYRM12B can provide a clock signal for the microcontroller, avoiding the need for two crystals.   For low power applications,  HYRM12B supports low duty cycle operation based on the internal wake-up timer

Introduction

HYRM12B tranceiver module has become quite popular recently due to its low price comparing to other modules on the market. But many people find it hard to make these tranceivers work (mainly because of buggy programming guide provided by manufacturer, I guess...). This short article contains compact and simple code that can be used just to get these modules running for the first time. It is based on manufacturer's examle code with slight (but crucial) changes.

Schematic

To interface HYRM12B modules I used Atmel's ATtiny2313. Recommended power supply for the module is 3.8V so I decided to power both the processor and the module from 3.3V. It can be a problem with the Mega family as you will need "L" version then. Some people claim that they run those modules from 5V and everything's fine. The other solution is splitted power supply (5V for processor and 3.3V for HYRM12B ) but resistors are needed on IO pins (5kohm or so) in this case. Implementing SPI interface doesn't require strict time delays or clock stability so processor is running on the 8MHz internal RC oscillator.

 

FEATURES
  • Fully integrated (low BOM, easy design-in)
  • No alignment required in production
  • Fast-settling, programmable, high-resolution PLL synthesizer
  • Fast frequency-hopping capability
  • High bit rate (up to 115.2 kbps in digital mode)
  • Direct differential antenna input/output
  • Integrated power amplifier
  • Programmable TX frequency deviation (15 to 240 kHz)
  • Programmable RX baseband bandwidth (67 to 400 kHz)
  • Analog and digital RSSI outputs
  • Automatic frequency control (AFC)
  • Data quality detection (DQD)
  • Internal data filtering and clock recovery
  • RX synchron pattern recognition
  • SPI compatible serial control interface
  • Clock and reset signals for microcontroller
  • 16 bit RX Data FIFO
  • Two 8 bit TX data registers
  • Low power duty cycle mode
  • Standard 10 MHz crystal reference
  • Wake-up timer
  • 2.2 to 3.8 V supply voltage
  • Low power consumption
  • Low standby current (0.3µA)
  • Supports very short packets (down to 3 bytes)
  • Excellent temperature stability of the RF parameters
  • 868MHZ

Application  
•   Home security and alarm 
•   Remote  control, keyless entry  
•   Wireless keyboard/mouse and othe
•   Toy controls 
•   Remote  keyless entry 
•   Tire pressure monitoring 
•   Telemetry 
•   Personal/patient  data logging 
•   Remote automatic meter reading

4. Technical sport manual (please contact me on ebay message whenever you need ):
a: HYRM12B user manual ;
b: FSK Module Reflow instruction;
cRFM12 Demo Kit User Manual ;
d:ANTENNAS APPLICATIONS FOR RF MODULE;
e:RFM12B programming guide;

Antenna 

433 1/4 wave = 164.7mm
433 1/2 wave = 329.4mm
433 full wave = 692.7mm

868 1/4 wave = 82.2mm
868 1/2 wave = 164.3mm
868 full wave = 345.5mm

915 1/4 wave = 77.9mm
915 1/2 wave = 155.9mm
915 full wave = 327.8mm

Arduino Uno Connections

2.jpg 

Alternative connection diagram (only for when Atmega328 is running at 3.3V):

7.jpg
Here is the stripboard layout for the main board and RFM12B carrier, note that I haven’t connected all the connections on the RFM12B, only those actually required to interface with the ATmega.
6.jpg
 
It connects a RFM12B radio and a micro SD card to the SPI bus. They both work, i.e. the radio can send & receive packets and the 2Gb Kingston µSD card can successfully enter SPI mode. These two peripherals alone would be enough to set up a self-contained data logger, but this is just the start – less than half of the shield area has been used so far.
3297526692_5a1d29c127_o.jpg
 
Introduction for Shenzhen Canton-electronics Trading Co.,Ltd :
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.
 
Shipping:
Normally shipping is by Airmail from China Post Air Mail or Hong Kong Post Air Mail ,15-60 days shipping time based on different country .
Express is available, shipping time is 2-7 days all over the world, and telephone number is needed. Please contact us first for extra payment .
 
Benefits
The Best Prices. By working with Canton-electronics Ltd, you can take advantage of the internet business, cut off the wholesalers cost and other costs, and import your products directly from the manufacturer at incredible prices.
Prompt Delivery. Most units are in stock all the time, standard units will be completed within 1-3 days if they are sold out, it is great help for you if your project must be completed before deadline.
Prompt Service. Mails will be replied within 24 hours We work 6 days a week.
 
 
Return Policy
All mails will be replied to within 24 hours except on weekend and holidays.
Every item is manufactured under Strict Quality-Assurance Guidelines. If you are dissatisfied for any reason, please return the product to us, and we'll refund your money(not including shipping fees).
Please ensure that return items are not used.
Return items must be Posted within 7 days of receipt.
Please inform us via email before posting your return package.
 
 
PAYMENT
We accept PayPal only.
We only ship item to your PayPal verified address.
Payment must be received within 3 Days from the date of purchase.
Please leave note in PayPal when making the payment if you have any special request (colors/size).
Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders.
 
 
Import tax :
We will dispatch the item as SAMPLE or GIFT, label the total amount on the custom declare invoice .
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying.

 

Online Security
All transactions are secured. The website is provided with an SSL encryption system to protect personal and payment data. We do not sell or ship any items ordered through the Site directly to anyone we know to be under the age of 18. We will not collect and personally identifiable information (e.g. name, address, telephone number and e-mail address), also referred to herein as "personal information", about you unless you provide it to us voluntarily.

Items can be returned for a refund or exchange within 60 days of the date of purchase. But the reason for returns caused by yourself (eg, size, color you choose), cannot be accepted. Special circumstances may require partnership with corporate business partners. For more information, please contact our customer service. We shall ship the items via DHL or USPS Once your order is processed you will receive email notification with shipment tracking number. All delivery standards begin when you receive this email. If order is placed after 3:00 PM CST on Friday or on the weekend, the earliest it will ship is Monday.