welcome to Canton-Electronics Store
TTL TX ARDUINO UNO R3 USB PC Software RF Wireless Control 12V Relay Receiver

TTL TX ARDUINO UNO R3 USB PC Software RF Wireless Control 12V Relay Receiver

  • Model: AK029*1+CE002*1
  • Shipping Weight: 0.1Kg
  • 10000 Units in Stock

$17.99

Quantity:
  • Product Description
  • Shop Confidence
  • Shipping & Return
  • Customer Reviews
Qty:
 
1 PCS 433M Wireless transmitter module(PC Software please contact sellers  );
1 PCS 433M 1 channel relay switch;
 
433M Wireless transmitter module & 433M 1 channel relay switch
RT311
 
PC software control (4 channel relay receiver is only as a sample )  : 
 
RT312 1
 
 
 
Arduino control(4 channel relay receiver is only as a sample ) :
 
 
RT312 4

 

Transmitter Modules No: CE002;
 
Dimension:
Size (LxWxT): 17 * 12 * 10mm;
Weight: 3g (not including antenna) , 4g (including the antenna);
CE002_5
     

Pin assignment:

GND   Gound;

VCC   Positive DC 5V( 4.5~5.5V)

TXD   UART transmit pin(5V TTL)

RXD   UART receive  pin(5V TTL)
 

Transmit encode signal

Transmit compatiable 1527 2262 encode(Default:1527 encode) ;
 

Typical Application

Model airplane;
Car Security System;
Garage Door Controller;
Remote Control Fan;
Home Security/Automation System;
Remote Control Toys;

GSM/PSTN Alarm ;

 
CE002_3
 
How to install into PC : 

Ce002 

Test Software:
4 Button Remotes
CE002_6
 
15 Button Remotes
CE002_7
    
User guide :
CE002_4
 

Button remote mode:no need to do any program, you only need to connect to DC5power , press test Button then this modules can do as 1 channel remote.(note: you hand cannot touch the electronic componts of the transmitter modules when press test button , or your hands will interface transmit process) .

 

2USB Virtual remote mode: can use our software USB Virtual Remotes“to let PC control UART remote , can also UART HyperTerminal (HEX format  9600 N 8 1,
the way of transmit command to control UART remote .
 

MCU control mode:can use MCU(such as:ARM STM32 AVR PIC) DSP FPGA/CPLD to transmit command to control . 

 
Remote protocol:

Baud rate is 96008 data bitsNo parity bit ,1 stop bit., Each data frame contains 8 bytes.

Command format

Bytes

1

2

3

4

5

6

7

8

 

Frame head

Reserve byte

Button value

Command

Checksum

transmit button value command

0x5556

0x000000

0X01-

0X0F

05

0xB1-0xBF

 

Return command format

Byte number 

1

2

3

4

5

6

7

8

 

Frame head

Reserve byte

Button value

Command

checksum

Return command

0x333C

0x000000

0X01-

0X0F

05

0x75-0x83

    

Detail command please refer to UART Remote protocol. 
 
Connecting with Arduino MEGA2560 (sample code please contact me after order ) :

CE002

arduino 1
 
 
Relay receiver controller :
Receiver :
AK026 2
 

AK026 3

 

Technical indicators:

1.operating voltage: DC 12V ;       

2.working frequency:433.92MHz;
3:Maximum load: 1000 watts;
4:PCB Size:41×20×15mm;
5: Momentary Mode ,Latch Mode  , Toggle Mode can be adjustable by slodering back side.
6. Pls connect the receiver modules properly before power supply ;
8: Momentary Mode ,Latch Mode  , Toggle Mode can be adjustable by jumper .
9. Pls connect the receiver modules properly before power supply ;
10: 1 chanels;
11: Learning function (can works with EV1527 and PT2262 remote , can store 16 pcs different code remote );

 
 
Advantage :
1:  Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 Learning remotes to re-learn;

 

AK026

Output:

A.singnal Inter-locking (Latch)----connect 2  and 3 ;

B.singnal Self-locking (Toggle) ---- connect 1 and 2 ;

C.singnal Non-locking (Momentary ) ---- All disconnect  ;

·         Toggle : Press->On; Press again->Off ;

·         Latched : Press->On; Press other button->Off ;

·         Momentary : Press and hold->On; Release->Off ;

Relay mode :

Normally close (NC ) ;
Normally open (NO ) ;
  • Normally-open (NOcontacts connect the circuit when the relay is activated; the circuit is disconnected when the relay is inactive. It is also called a Form A contact or "make" contact. NO contacts may also be distinguished as "early-make" or NOEM, which means that the contacts close before the button or switch is fully engaged.
  • Normally-closed (NC) contacts disconnect the circuit when the relay is activated; the circuit is connected when the relay is inactive. It is also called a Form B contact or "break" contact. NC contacts may also be distinguished as "late-break" or NCLB, which means that the contacts stay closed until the button or switch is fully disengaged.

Learning method and steps

1.       Keep pressing learnig key on receiver board , release the button when LED is off , enter the learning state ;

2.       Press any key on remote control within 5 seconds , LED flash 3 times and then turn on , then it have success in learning .

Clear the deposit information

Keep Pressing Learning Key , LED turns off , Wait 10 Seconds , LED turn on , that deposited information has been successfully cleared ;

  
 
Introduction for Shenzhen Canton-electronics Trading Co.,Ltd :
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.

 

Shipping:
Normally shipping is by Airmail from China Post Air Mail or Hong Kong Post Air Mail ,15-60 days shipping time based on different country .
Express is available, shipping time is 2-7 days all over the world, and telephone number is needed. Please contact us first for extra payment .

Benefits
The Best Prices. By working with Canton-electronics Ltd, you can take advantage of the internet business, cut off the wholesalers cost and other costs, and import your products directly from the manufacturer at incredible prices.
Prompt Delivery. Most units are in stock all the time, standard units will be completed within 1-3 days if they are sold out, it is great help for you if your project must be completed before deadline.
Prompt Service. Mails will be replied within 24 hours We work 6 days  a week.

Return Policy
All mails will be replied to within 24 hours except on weekend and holidays.
Every item is manufactured under Strict Quality-Assurance Guidelines. If you are dissatisfied for any reason, please return the product to us, and we'll refund your money(not  including  shipping fees).
Please ensure that return items are not used.
Return items must be Posted within 7 days of receipt.
Please inform us via email before posting your return package.

PAYMENT
We accept PayPal only. 
We only ship item to your PayPal verified address. 
Payment must be received within 3 Days from the date of purchase. 
Please leave note in PayPal when making the payment if you have any special request (colors/size).
Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders. 

Import tax : 
 We will dispatch the item as Electronic Module,  label the total amount on the custom declare invoice .
 Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying.
 
 

 

Online Security
All transactions are secured. The website is provided with an SSL encryption system to protect personal and payment data. We do not sell or ship any items ordered through the Site directly to anyone we know to be under the age of 18. We will not collect and personally identifiable information (e.g. name, address, telephone number and e-mail address), also referred to herein as "personal information", about you unless you provide it to us voluntarily.

Items can be returned for a refund or exchange within 60 days of the date of purchase. But the reason for returns caused by yourself (eg, size, color you choose), cannot be accepted. Special circumstances may require partnership with corporate business partners. For more information, please contact our customer service. We shall ship the items via DHL or USPS Once your order is processed you will receive email notification with shipment tracking number. All delivery standards begin when you receive this email. If order is placed after 3:00 PM CST on Friday or on the weekend, the earliest it will ship is Monday.