welcome to Canton-Electronics Store
Arduino Demo Code MCU RF Wireless Transmitter Control DC5V Timer Relay Receiver
  • Arduino Demo Code MCU RF Wireless Transmitter Control DC5V Timer Relay Receiver
  • Arduino Demo Code MCU RF Wireless Transmitter Control DC5V Timer Relay Receiver

Arduino Demo Code MCU RF Wireless Transmitter Control DC5V Timer Relay Receiver

  • Model: CE029B*2+TB195*1
  • Shipping Weight: 0.12Kg
  • 1000 Units in Stock

USD $22.99

Quantity:
  • Product Description
  • Shop Confidence
  • Shipping & Return
  • Customer Reviews
Modules No: CE029B*2+TB195*1 .
 
This remote switch allows you to remotely control any 12 Volt DC device. Perfect for controlling any 12V devices such as Lights, Fans, Landscaping Lighting and more. This easy-to-wire kit is perfect for anybody with a basic knowledge of electrical wiring, and can easily be wired to many 12V applications. For PC Modders, the end of result of the Remote Control 12VDC kit is truly impressive and is sure to impress the crowds. For DIYers, the kit will give some magical effect to your projects.
 
Encoding and Decoding

The popular link is like this: MCU -> Encoder -> Transmitter ------ Receiver -> Decoder -> MCU,
PT2262(Encoder) are optional, their existence is to 1)avoid confusing when multiple RF links in range 2) isolate disturbance.
You can integrate the encoding and decoding work to the MCUs on both side. Whenever there is no 433.92MHz devices around, you may use it as direct cable connection.
 
Packing list :
1 pcs 4 Channel transmitter remote ;
2 pcs 2 channel DC5V Receiver relay board ;
(all user guide was provided in this item description , there is no extra manual )
 
 
YC077 US9
 
Typical applications:
DC 5V Home lighting system
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 5V DC Motor,RS360
 
 
 
 
 
 
Work mode

CE029_13

CE029_14CE029_15

 
 
Typical applications:
DC 5V Home lighting system
Garage Door
Elevators
Motor reversing control
Remote control switch
Smart Home / Home Automation
LED lighting
Fluorescent lamp
DC 5 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 5V control circuit,Wiring diagram below. "LOAD" may be LED lights, fans, motors and other DC 5V
 
 

 

 

Wiring Diagram 2:

DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 5V load, need another DC 5V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment

 

Product Name : DC 5V 433mHz 2 Channel Wireless Delay Relay Remote Controller

Packing list:

1 PCS 433M DC 5V 2 Channel Multifunction Wireless Controller
 
 
 
 
CE029_7

 


Technical indicators:

Operating voltage : DC 5V

Operating Current : All relays close,about 15MA; one relay open,about 86MA;two relay open,about 157MA

Operating frequency : 433.92M;

Receiver sensitivity : -108dB;

Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch), Delay;Each channel independently set the Work mode; 500,000 seconds maximum delay

Size(Including housing) : 75*54*28mm

Learning function (can works with EV1527 and PT2262 remote, can store 16 pcs different code remote );

Max load : 500W;

Normally, we would adapter remote control and receiver.
If the item you received has not been adapted Or you need to add accessories, Please follow the instructions below

Learning method and steps:

Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes

Clean code: press the button and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)

Step 1 (into the learning mode): Press the button (about 1 second), LED off;

Step 2 (adapter channel 1): Then press the first button on the remote control, LED flashes four times off, then learning the first button value

Step 3 (Adaptation Channel 2): Then press the second button on the remote control, LED flashes four times brighter, then learned two key values

 

Use more details, please click here!

 

CE029_9
Transmitter :

 

Model No. TB195 Encoder Transmitter
Function discription Encoder Transmitter modules
Operating voltage
3V ~ 12V DC
Static current
max≤8mA(12V), min≤2mA(3V)
Operating frequency 433MHz
modulation Mode ASK/OOK
SAW Frequency stability ±150kHz(max)
Transmitter Power 50mW (315MHz, 12V)
Data rate ≤10Kbps
Antenns length 24 cm (315 MHz), 18 cm (433.92 MHz)
Dimension 36 * 27mm
Encodeing format PT2264 fixing code (same as PT2262 SC2262 ) ,Work with PT2272 decoder IC
Transmitter distance 300-500M (open area)
 

Connect to MCU or Arduino :
 

Connect to Switch:

 
 
 

 

 
 
 
 
 

 

Online Security
All transactions are secured. The website is provided with an SSL encryption system to protect personal and payment data. We do not sell or ship any items ordered through the Site directly to anyone we know to be under the age of 18. We will not collect and personally identifiable information (e.g. name, address, telephone number and e-mail address), also referred to herein as "personal information", about you unless you provide it to us voluntarily.

Items can be returned for a refund or exchange within 60 days of the date of purchase. But the reason for returns caused by yourself (eg, size, color you choose), cannot be accepted. Special circumstances may require partnership with corporate business partners. For more information, please contact our customer service. We shall ship the items via DHL or USPS Once your order is processed you will receive email notification with shipment tracking number. All delivery standards begin when you receive this email. If order is placed after 3:00 PM CST on Friday or on the weekend, the earliest it will ship is Monday.