welcome to Canton-Electronics Store
433MHz RF Wireless Kits PC USB Transmitter UART Remote Control 2 Channels DC5V

433MHz RF Wireless Kits PC USB Transmitter UART Remote Control 2 Channels DC5V

  • Model: CE001*1+CE002*1
  • Shipping Weight: 0.02Kg
  • 10000 Units in Stock

USD $12.99

Quantity:
  • Product Description
  • Shop Confidence
  • Shipping & Return
  • Customer Reviews
Below item is powered by Canton-electronics Ltd .
Kits No .: RT270 .
RT270
 
Receiver Modules No: CE001;
 
 
Dimension:
Size (LxWxT): 17 * 12 * 9mm;
Weight: 2g (not including antenna) , 3g (including the antenna);
Very small and light Receiver Module(Use Model airplane Model car is Perfect!)
 
Specifications: 

Operating voltage

5.0VDC ±0.5V

 Working priceple

 can work with transmitter signal from PT2262 SC2262 EV1527 PT2264 PT2260

Operating frequency

433MHz
 Receiver Sensivity  -107dBm

modulation Mode

ASK/OOK

Operating temp.

-10 °C ~ +60 °C
Antenns length
20 cm (315 MHz), 18 cm (433.92 MHz)

Output signal

2 Channels output , TTL level ,

  
Pin assignment :
GND: Connect to Ground ;
VCC: Positive Power Supply DC 5V (range 4.5 ~ 5.5V);
D0 channel :  0 output. Sink current up to 20MA, pull current 270UA ;
D1 channel :  1 output. Sink current up to 20MA, pull current 270UA ;
 
Typical Applications :
Model airplane;
Car Security System;
Garage Door Controller;
Remote Control Fan;
Home Security/Automation System;
Remote Control Toys;
GSM/PSTN Alarm ;
 

 
Output pin connection :
 
5 .jpg

 

 
User guide :

Delete Memory : 
Keep press S1 button , LED is on and off after 8 second , then it mean Deleting successfully ;
 
Learing to Memory : 
(1): Press S1 button until LED is on , release S1 button ,  this receiver enter program status ;
(2): press " button 1 " on the remote, LED blink quickly , it mean "button 1" was memoried by channel "D0" ;
(3): press " button 2 " on the remote, LED blink quickly , it mean "button 2" was memoried by channel "D1" ;
Note 
The learning process must be completed within the 10 second, or it will automatically quit program status ;
How to quit program status while in program status :
(1) Keep pressing S1 button , it will quit program status when LED is off ;
(2) Don't press any thing and it will auto quit program status ;   
 
Output mode : 

A.singnal Non-locking (Momentary)----Disconnect J1 (defult is Momentary) ;

B.singnal Self-locking (Toggle) ---- connect J1;

Momentary------------Press the Transmitter button A, the receiver relay A is ON, release button A; the receiver relay A is OFF, the same as B/C/D ,Every channel is Independent ;

Toggle-------------------Press transmitter button A for 1 time , the receiver relay A is ON, press button A again, the receiver relay A is OFF, the same as B/C/D. Every channel is Independent ;
 
 
Transmitter Modules No: CE002;
 
 
Dimension:
Size (LxWxT): 17 * 12 * 10mm;
Weight: 3g (not including antenna) , 4g (including the antenna);
CE002_5
     

Pin assignment:

GND   Gound;

VCC   Positive DC 5V( 4.5~5.5V)

TXD   UART transmit pin(5V TTL)

RXD   UART receive  pin(5V TTL)
 

Transmit encode signal

Transmit compatiable 1527 2262 encode(Default:1527 encode) ;
 

Typical Application

Model airplane;
Car Security System;
Garage Door Controller;
Remote Control Fan;
Home Security/Automation System;
Remote Control Toys;

GSM/PSTN Alarm ;

 
CE002_3
 
How to install into PC : 

Ce002 

Test Software:
4 Button Remotes
CE002_6
 
15 Button Remotes
CE002_7
    
User guide :
CE002_4
 

Button remote mode:no need to do any program, you only need to connect to DC5power , press test Button then this modules can do as 1 channel remote.(note: you hand cannot touch the electronic componts of the transmitter modules when press test button , or your hands will interface transmit process) .

 

2USB Virtual remote mode: can use our software USB Virtual Remotes“to let PC control UART remote , can also UART HyperTerminal (HEX format  9600 N 8 1,
the way of transmit command to control UART remote .
 

MCU control mode:can use MCU(such as:ARM STM32 AVR PIC) DSP FPGA/CPLD to transmit command to control . 

 
Remote protocol:

Baud rate is 96008 data bitsNo parity bit ,1 stop bit., Each data frame contains 8 bytes.

Command format

Bytes

1

2

3

4

5

6

7

8

 

Frame head

Reserve byte

Button value

Command

Checksum

transmit button value command

0x5556

0x000000

0X01-

0X0F

05

0xB1-0xBF

 

Return command format

Byte number 

1

2

3

4

5

6

7

8

 

Frame head

Reserve byte

Button value

Command

checksum

Return command

0x333C

0x000000

0X01-

0X0F

05

0x75-0x83

    

Detail command please refer to UART Remote protocol. 

 

Introduction for Shenzhen Canton-electronics Trading Co.,Ltd :
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.

 

Shipping:
Normally shipping is by Airmail from China Post Air Mail or Hong Kong Post Air Mail ,15-60 days shipping time based on different country .
Express is available, shipping time is 2-7 days all over the world, and telephone number is needed. Please contact us first for extra payment .
 
Benefits
The Best Prices. By working with Canton-electronics Ltd, you can take advantage of the internet business, cut off the wholesalers cost and other costs, and import your products directly from the manufacturer at incredible prices.
Prompt Delivery. Most units are in stock all the time, standard units will be completed within 1-3 days if they are sold out, it is great help for you if your project must be completed before deadline.
Prompt Service. Mails will be replied within 24 hours We work 6 days  a week.
 
Return Policy
All mails will be replied to within 24 hours except on weekend and holidays.
Every item is manufactured under Strict Quality-Assurance Guidelines. If you are dissatisfied for any reason, please return the product to us, and we'll refund your money(not  including  shipping fees).
Please ensure that return items are not used.
Return items must be Posted within 7 days of receipt.
Please inform us via email before posting your return package.
 
PAYMENT
We accept PayPal only. 
We only ship item to your PayPal verified address. 
Payment must be received within 3 Days from the date of purchase. 
Please leave note in PayPal when making the payment if you have any special request (colors/size).
 
Import tax : 
 We will dispatch the item as Electronic Modules ,  label the total amount on the custom declare invoice .
 Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying.
 

 

Online Security
All transactions are secured. The website is provided with an SSL encryption system to protect personal and payment data. We do not sell or ship any items ordered through the Site directly to anyone we know to be under the age of 18. We will not collect and personally identifiable information (e.g. name, address, telephone number and e-mail address), also referred to herein as "personal information", about you unless you provide it to us voluntarily.

Items can be returned for a refund or exchange within 60 days of the date of purchase. But the reason for returns caused by yourself (eg, size, color you choose), cannot be accepted. Special circumstances may require partnership with corporate business partners. For more information, please contact our customer service. We shall ship the items via DHL or USPS Once your order is processed you will receive email notification with shipment tracking number. All delivery standards begin when you receive this email. If order is placed after 3:00 PM CST on Friday or on the weekend, the earliest it will ship is Monday.