welcome to Canton-Electronics Store
433M 1 Transmitter module & 4 Wireless Relay Controller for Arduino UNO MEGA2560

433M 1 Transmitter module & 4 Wireless Relay Controller for Arduino UNO MEGA2560

  • Model: CE033B*4+BX003*1
  • Shipping Weight: 0.1Kg
  • 10000 Units in Stock

USD $29.99

Quantity:
  • Product Description
  • Shop Confidence
  • Shipping & Return
  • Customer Reviews
Qty:
 
1 PCS 433M Wireless transmitter module(Does not include Arduino UNO);
4 PCS 433M 1 channels relay switch;
 
1 PCS 433M Wireless transmitter module & 4 PCS 433M 1 channels relay switch

 
 
 
Wireless transmitter module connected with  Arduino uno(replace PT2262 Remote Keyfob
RT214_11  
 
USE: 
 
RT324_3
 
 
 
Software control:
How to use:send "a" trigger A channel relay,send "b" trigger A channel relay,Etc.
 
 
arduino core fragment(complete code through ebay message  Request):
  
//Author: cantone-electonics
//Arduino 1.0
//Arduino uno R3
//Making a wireless remote control with arduino
 
  
...
 
//send:8 Address Bits, 4 Data Bits, Sync bit
void send_data()
 
 
void setup() {
  // initialize the LED pin as an output:
  pinMode(ledPin, OUTPUT); 
   // initialize the encoder DOUT pin as an output
  pinMode(data_out, OUTPUT);
 
  Serial.begin(9600);
 
}
 
void loop()
{
  ...
  
  while(1)
  {
    //get key from pc serial port
    while (Serial.available() > 0) 
    {
        keydata = Serial.read();
        receive_flag = 1;
        delay(2);
    }
   
    if(receive_flag == 1)//if get key,send key
    {
     
    receive_flag = 0;
   
    if((keydata == 'a') || (keydata == 'A'))//trigger A channel relay.
    {
      Temporary[2] = 0xC0;// 0xC0 is A button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
       Serial.println(".....trigger A channel relay.....");
    }
    else if((keydata == 'b') || (keydata == 'B'))//trigger B channel relay.
    {
      Temporary[2] = 0x30;// 0x30 is B button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
      Serial.println(".....trigger B channel relay.....");
    }
     else if((keydata == 'c') || (keydata == 'C'))//trigger C channel relay.
     {
      Temporary[2] = 0x0C;// 0x0C is C button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
      Serial.println(".....trigger C channel relay.....");
     
     }
     else if((keydata == 'd') || (keydata == 'D'))//trigger D channel relay.
     {
      Temporary[2] = 0x03;// 0x03 is D button key
      digitalWrite(ledPin, HIGH);//Turn on led
      send_data();//send code word
      Serial.println(".....trigger D channel relay.....");
     }
    
    ...
  
  }
}
 

Description (Click on the link below)

receiver Features:
 
Typical applications:
 
DC 12V Home lighting system
Remote control switch
Smart Home / Home Automation
Garage Door
Fluorescent lamp Illumination
Motorcycle Electromobile
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 12 DC Motor,RS360
 
 
 
 
 
 
 
Typical applications:
DC 5V Home lighting system
Remote control switch
Smart Home / Home Automation
Garage Door
Fluorescent lamp Illumination
Motorcycle Electromobile
Remote controlled gates
Security Monitoring
LED lighting
Fluorescent lamp
DC 5 DC Motor,RS360
 
 
Wiring Diagram 1:
DC 5V control circuit,Wiring diagram below. "LOAD" may be LED lamp, fans, motors and other DC 5V Electrical equipment
 
 

 

 

Wiring Diagram 2:

DC 1-48V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 5V load, need another DC 5V power supply). "LOAD" may be LED lamp, fans, motors and other DC AC equipment

Product Name : 5V Delay remote control relay Smart Home Kit 433M Multifunction ON/OFF Switch with Timing Non-locking Self-locking Inter-locking

Packing list:

1 PCS 433M DC 5V one Channel Delay Switch
 
 
 
 
receiver Features:
 
1 Operating voltage: DC 5V;
 
2 Operating Current: relays close, about 11MA; relay open,about 80MA;
 
3 Operating frequency: 433.92M;
 
4 Receiver sensitivity : -108dBm
 
5 Decode : learning code, can be adapted EV1527 / PT2262 and compatible remote control, you can store up to 32 remote control
 
6 Work mode : Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch),Delay; 1-5000 seconds adjustable delay time, minimum step 0.1 seconds
 
7 Size(Including housing)50*35*22mm
 
8 Weight(including housing) 30g
 
9 Relay Maximum load(Recommended<5A):10A/250VAC,10A/125VAC,10A/30VDC, 10A/28VDC,10A/12VDC

 

 

Work mode

NO : Relay normally open contact
COM : Relay common contact
NC : Relay normally closed contact
Open : NO connection COM, NC disconnect COM
Close : NO disconnect COM, NC connection COM
Momentary : Press the Transmitter button , the receiver relay is Open, release button;the relay is Close;
Toggle : Press transmitter button for 1 time , the receiver relay is Open, press button again, the relay is Close;
Latched : Press transmitter button A, the receiver relay is Open Press transmitter button B, the receiver relay is Close.
Delay : Press the Transmitter button, the receiver relay Open,After a set time delay, the receiver relay is Close;
 
If during the delay, press the button of Transmitter, delay start again; if the delay period, press and hold the button of Transmitter 3-4 seconds, the receiver controller stops the delay, the relay Close
 
Adapter remote control (learning remote control):
Under normal operating mode, LED will be lit, when receives a valid remote control (EV1527 / PT2262) button values, LED flashes
 
Clean code: press the key and held down, LED off, LED will light about 8 seconds later, clean code is completed (Note: After performing clean code previously stored remote control value does not exist)
 
Step 1 (into the learning mode): Press the key (about 1 second), LED off;
Step 2 (adapter button): Then press the utton on the remote control, LED flashes four times on, then learning the button value
 
Note:
Only the Non-locking (Momentary is defult),Self-locking (Toggle),Inter-locking (Latch) mode to a "clear code" and " learning " action
In the "delay" mode can only set the delay time
 
 
Delay setting:
Step 1, the mode is set to "delay" mode (jumper cap on the M1 into two rows of pins)
Step 2, press the key until the LED is off
Step 3. Click the key again, LED flashes
Step 4. Click the key again after a period of time, LED light
LED blinking time is the delay time.
 
 
Video tutorials : http://1drv.ms/1PIkxB6
Transmitter :
 
 

BX003 2.jpg

 

 

Application on Atmega8 AVR microcontrollers :

Item Description 

 

Technical Data :
 
Transmitter module No.: BX-TM01 -433 ;
Operating frequency (MHz): 433.92MHz ;
Transmit power: more than 10mW;
Operating Voltage (V): DC 3-12V ;
Low transmit of the static power consumption is current consumption : 10 mA ( No transmit No current consumption);
SAW Frequency stability :±75KHZ;
Data transfer rate : 3 kb/s ;
Operating temperature: -20 ℃ ~ +60 ℃;
Size : 11x16x5.5MM;
Type of Output: TTL;
 
Typical Applications
• Automotive RKE systems
• Automotive alarm systems
• Automotive immobilizers
• Gate and garage door openers
• Burglar alarm systems
 
Introduction for Shenzhen Canton-electronics Trading Co.,Ltd :
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.

 

Shipping:
Normally shipping is by Airmail from China Post Air Mail or Hong Kong Post Air Mail ,15-60 days shipping time based on different country .
Express is available, shipping time is 2-7 days all over the world, and telephone number is needed. Please contact us first for extra payment .

Benefits
The Best Prices. By working with Canton-electronics Ltd, you can take advantage of the internet business, cut off the wholesalers cost and other costs, and import your products directly from the manufacturer at incredible prices.
Prompt Delivery. Most units are in stock all the time, standard units will be completed within 1-3 days if they are sold out, it is great help for you if your project must be completed before deadline.
Prompt Service. Mails will be replied within 24 hours We work 6 days  a week.

Return Policy
All mails will be replied to within 24 hours except on weekend and holidays.
Every item is manufactured under Strict Quality-Assurance Guidelines. If you are dissatisfied for any reason, please return the product to us, and we'll refund your money(not  including  shipping fees).
Please ensure that return items are not used.
Return items must be Posted within 7 days of receipt.
Please inform us via email before posting your return package.

PAYMENT
We accept PayPal only. 
We only ship item to your PayPal verified address. 
Payment must be received within 3 Days from the date of purchase. 
Please leave note in PayPal when making the payment if you have any special request (colors/size).
Orders will be processed instantly and dispatched in same day normally, so we do NOT accept any Email/Message note before or after you place orders. 

Import tax : 
 We will dispatch the item as Electronic Module,  label the total amount on the custom declare invoice .
 Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying.

Online Security
All transactions are secured. The website is provided with an SSL encryption system to protect personal and payment data. We do not sell or ship any items ordered through the Site directly to anyone we know to be under the age of 18. We will not collect and personally identifiable information (e.g. name, address, telephone number and e-mail address), also referred to herein as "personal information", about you unless you provide it to us voluntarily.

Items can be returned for a refund or exchange within 60 days of the date of purchase. But the reason for returns caused by yourself (eg, size, color you choose), cannot be accepted. Special circumstances may require partnership with corporate business partners. For more information, please contact our customer service. We shall ship the items via DHL or USPS Once your order is processed you will receive email notification with shipment tracking number. All delivery standards begin when you receive this email. If order is placed after 3:00 PM CST on Friday or on the weekend, the earliest it will ship is Monday.